I've swapped the order of posts a bit, as I think it would be better to explain some steps first and refer to them later when explaining the alternative techniques for closing the skirt. So, today I'm going to talk about the lining and tomorrow I'll show you the technique for sewing a lapped zipper.
Today we'll assemble the lining and attach it to the skirt. I have to warn you I don't sew this part by the book, instead I'm using a technique I've adopted over the time and that provides the best results to me.
If you like to have hanger loops on a skirt, now is the time to sew them on, You can use satin band for these, or you can make them from lining remnants.
Sew the belt loops to the skirt by placing them to the right side of it, and matching them with the side seams.
Back to the lining. With right sides together, attach the waist yoke to the lining panel. Sew the seams and press them. Repeat the process on both front and back panels.
Sew the lining along the side seams, with right sides together. Leave the top of the left side seam open for inserting a zipper. Note that the left and right sides on the lining are reversed compared to the skirt, so that when looked from the right side of the fabric and front of the lining, the left hip matches with the right side seam, and vice versa.
Slip the skirt into the lining with right sides together and align them along the waistline and side seams.
Pin the layers together along the waistline, stopping the pinning several centimeters away from the zipper slit,
Sew the layers together, but end the stitches where the pinning ends.
Press the seams along the waistline.
Open the zipper, and fold the seam allowances of the slit of the skirt with right sides together. Mark a spot on the slit SA where the future seam connecting the skirt to the lining will run. The seam should be placed approximately 0.5 cm from the zipper teeth.
Mark the same seam line on the lining / facing.
Pin the skirt to the lining along the zipper slit, pinning in direction from the top towards the bottom of the zipper. You will notice the skirt's layer is longer than the facing.
Sew the layers together, and fold the edge along the zipper band, folding towards the facing layer.
Stitch the layers together along the waist line, thus connecting the seam with the previously made one. Cut the corners of the SAs in order to reduce the bulk when turning the skirt inside out.
If you're using a thicker fabric, trim off the SA of the facing layer along the waistline. This way you will reduce the bulk.
Flip the skirt inside out and press the facing along the zipper slit.
Zlata Sewalong - the posts
Tomorrow I'll show you how to sew a lapped zipper.
Stay tuned!
- #1 Fabric recommendations
- #2 Print the pattern
- #3 Fitting alterations - grading the pattern
- #4 Fitting alterations for protruding rear
- #5 Cut the fabric
- #6 Sew the belt loops
- #7 Pleat the skirt
- #8 Sew the pockets
- #9 Assemble the skirt
- #10 Sew an invisible zipper
- #11 Sew a lapped zipper
- #12 Assemble the lining
- #13 Sew the button closure
- #14 Hem the skirt, method 1
- #15 Hem the skirt, method 2
- #16 Hem the skirt, method 3
- #17 Pattern alterations for various styles
How to buy the pattern
 |
Zlata skirt pattern costs $11.98,and it can be bought via my Etsy shop.
I use 2Checkout as a payment collector - it is an equivalent to PayPal - which accepts the following payment methods: * PayPal via 2checkout (www.2co.com) * Credit / Debit cards via 2checkout : Visa, Dina Card, Master Card, American Express, Discover PayPal doesn't support selling option for my country yet, so I use 2Checkout payment collector instead. |
When making a purchase order, select "Other" in the payment options. I have to manually issue an invoice for you, via 2Checkout system. The invoice contains a link where you can complete the purchase - it's a page on 2Checkout's website. Once you fill in your billing information, you can chose to pay either by using PayPal account or your credit card. You don't have to register to 2checkout and you won't be charged any additional fees. It's simple, fast and secure. Once the payment is completed, I will enable the pattern download on my Etsy store. I monitor the state of my Etsy store several times a day, and I get instant emails whenever any change is made, so the purchase is usually completed within the same day. Sometimes, due to my daily duties and a time zone differences, it takes more than a day to complete the purchase.
For any additional information about the pattern or the purchase, feel free to email me at: anajan.stepalica [at] gmail [dot] com.
Related posts
- Zlata skirt Pattern #1401
- Zlata skirt pattern - view A
- Zlata skirt pattern - view B
- Zlata skirt pattern - view C
- Zlata skirt pattern - the lining pattern
- Zlata skirt - testing the pattern, part 1
- Zlata skirt - testing the pattern, part 2
- Zlata skirt - testing the pattern, part 3
- Zlata skirt - testing the pattern, part 4
I was wondering if you could do a video tutorial of how to sew the zipper to the lining. I really like the way you do it but it's kind of hard for me to understand.
ReplyDelete